Roof covers
Machine tools for machining large work pieces are loaded primarily from above with tools and work pieces.
If the processing space is not closed during the manufacturing process, chips and coolants from the machine tool can enter the production environment and lead to contamination.
Our roof covers are designed individually for each machine, whether for the initial configuration of the machine or for retrofit retrofitting.
Your advantages with roof covers
The X-Velo roof cover retains chips and cooling lubricant in the machine and thus prevents contamination of the production environment.
The material used is translucent, so the ambient light from the production hall can be used to support the lighting of the machine room.
For opening and closing, the X-Velo can either be controlled via the machine tool or alternatively equipped with its own drive.
X-Velo is suitable for both initial fitting and retrofitting. It has a modular design and can be adapted for systems up to 12 m long and 6 m wide, travel speeds of up to 75 metres per minute are possible.
The X-Velo Roof Cover at a glance:
- Custom length, up to 12 m, custom solutions can be discussed
- High speeds of up to 75 m/minute
- Light transparent Material
- No twisting thanks to our special fasteners
- Easy to clean (open profile)
- Cover is easy to screw on, screw thread goes all the way through the profile
- Guide rails are included with delivery
- A motor drive can be integrated as an option
- Shutters that fit the drive perfectly
- Ideal for retrofitting and original fitting
