Our rotary clamping system – RotoClamp
RotoClamp is a compact clamping system for rotary applications. The pneumatic clamping offers high holding power and exceeds hydraulic systems not only in effectiveness, but also in efficiency, since the system costs are significantly lower. RotoClamp is fail-safe, as the shaft is fixed immediately and with great force in the event of a pneumatic failure.

Safety
Safety clamping by spring actuator. In case of a power loss, the axis is immediately clamped. Reaction times are very short due to pneumatics. With quick air-vent valve and quick-acting gate valve attached directly to the clamping mechanism, extremely short clamping times can be achieved.
Operating principle
The clamping with RotoClamp is based on the principle of the spring accumulator: In normal operation, a spring diaphragm is pressurized with compressed air and shortens itself. The clamping elements thereby lift off the shaft and release it. If the pneumatics fail, the spring plates immediately return to their original position and fix the shaft with great force. With the aid of a booster function, the already high clamping force can be further increased.
Your advantages with RotoClamp
Powerful
Pneumatic clamping with high forces, values of hydraulic clamps are achieved and exceeded
Responsive
Very short response times thanks to a quick exhaust / quick release valve
Fail-Safe
If the pneumatic system fails, RotoClamp clamps quickly and safely (fail-safe version)
Cost-effective
RotoClamp causes lower system costs than hydraulic systems

Suitable for many shafts
The RotoClamp rotary clamping system is compatible with all standard shaft sizes in the industry and can be mounted easily and quickly. As the RotoClamp works with compressed air, it does not cause any contamination.
Different clamping directions
The RotoClamp clamping systems are available in an internal clamping - RotoClamp Inside - and an external clamping version - RotoClamp Outside - for a wide range of application fields.