RotoClamp Inside

RotoClamp Inside XS Standard

RotoClamp Inside XS	Required  shaft  diameter	Elastic holding torque PN = 6 bar at 0 bar	Elastic holding torque PN = 6 bar at 6 bar Booster	Elastic holding torque PN = 4 bar at 0 bar	Elastic holding torque PN = 4 bar at 4 bar Booster	Modell	Download
Size	mm	Nm	Nm	Nm	Nm	CAD	PDF
RC 30 XS	30	30	50	20	35
RC 130 XS	130	400	720	250	450
RC 140 XS	140	450	820	300	550
RC 190 XS	190	600	1100	400	730

RotoClamp Inside XS Active

RotoClamp  Inside XS Active	Required shaft diameter	Elastic holding torque PN = 6 bar at 6 bar	Elastic holding torque PN = 4 bar at 4 bar	Modell	Download
Size	mm	Nm	Nm	CAD	PDF
RC 30 XS Active	30	30	20
RC 130 XS Active	130	400	250
RC 140 XS Active	140	450	300
RC 190 XS Active	190	600	400

Explanation

STEP file is available for download

We will be happy to send you these models on request. Please use the link above or send us your request to info@hema-group.com

TANDEM The tandem versions are designed individually, please ask for them

Do you require a customization or a special solution? Please send your inquiry to info@hema-group.com.

Please note:
You can download the standard model of the RotoClamp XS Standard and Active here (STEP).
The 3D CAD models provided here are intended solely for information and planning purposes. Despite careful creation, the models may contain errors, inaccuracies, or deviations from the actual products. The technical drawings, data sheets, and product specifications associated with the respective order confirmation are the sole authoritative references. Subject to change and errors; the respective written order confirmation applies.

RotoClamp Inside S Standard

RotoClamp Inside S	Required shaft diameter	Elastic holding torque PN = 6 bar at 0 bar	Elastic holding torque PN = 6 bar at 6 bar Booster	Elastic holding torque PN = 4 bar at 0 bar	Elastic holding torque PN = 4 bar at 4 bar Booster	Modell Standard	Modell Tandem	Download
Size	mm	Nm	Nm	Nm	Nm	CAD	CAD	PDF
RC 50 S	50	60	108	42	76
RC 60 S	60	84	153	59	107
RC 70 S	70	114	210	80	147
RC 80 S	80	150	270	105	189
RC 90 S	90	189	342	132	239

RotoClamp Inside S Active

RotoClamp Inside S Active	Required shaft diameter	Elastic holding  torque PN = 6 bar at 6 bar	Elastic holding  torque PN = 4 bar at 4 bar	Modell Standard	Modell Tandem	Download
Size	mm	Nm	Nm	CAD	CAD	PDF
RC 50 S Active	50	60	42
RC 60 S Active	60	84	59
RC 70 S Active	70	114	80
RC 80 S Active	80	150	105
RC 90 S Active	90	189	132

Explanation

STEP file is available for download

We will be happy to send you these models on request. Please use the link above or send us your request to info@hema-group.com

TANDEM The tandem versions are designed individually, please ask for them

Do you require a customization or a special solution? Please send your inquiry to info@hema-group.com.

Please note:
You can download the standard model of the RotoClamp S Standard and Active here (STEP).
The 3D CAD models provided here are intended solely for information and planning purposes. Despite careful creation, the models may contain errors, inaccuracies, or deviations from the actual products. The technical drawings, data sheets, and product specifications associated with the respective order confirmation are the sole authoritative references. Subject to change and errors; the respective written order confirmation applies.

RotoClamp Inside N Standard

RotoClamp Inside N	Required shaft diameter	Elastic holding torque PN = 6 bar at 0 bar	Elastic holding torque PN = 6 bar at 6 bar Booster	Elastic holding torque PN = 4 bar at 0 bar	Elastic holding torque PN = 4 bar at 4 bar Booster	Modell Standard	Modell Tandem	Download
Size	mm	Nm	Nm	Nm	Nm	CAD	CAD	PDF
RC 100 N	100	240	420	168	294
RC 120 N	120	336	600	235	420
RC 140 N	140	456	840	319	588
RC 160 N	160	600	1080	420	756
RC 180 N	180	750	1380	525	966
RC 200 N	200	930	1680	651	1176
RC 220 N	220	1110	2040	777	1428
RC 240 N	240	1350	2400	945	1680
RC 260 N	260	1560	2820	1092	1974
RC 280 N	280	1800	3240	1260	2268
RC 300 N	300	2100	3720	1470	2604
RC 320 N	320	2340	4200	1638	2940
RC 340 N	340	2580	4680	1806	3276

RotoClamp Inside N Active

RotoClamp Inside N Active	Required shaft diamete	Elastic holding  torque PN = 6 bar	Elastic holding  torque PN = 4 bar	Modell Standard	Modell Tandem	Download
Size	mm	Nm	Nm	CAD	CAD	PDF
RC 100 N Active	100	240	168
RC 120 N Active	120	336	235
RC 140 N Active	140	456	319
RC 160 N Active	160	600	420
RC 180 N Active	180	750	525
RC 200 N Active	200	930	650
RC 220 N Active	220	1110	777
RC 240 N Active	240	1350	945
RC 260 N Active	260	1560	1092
RC 280 N Active	280	1800	1260
RC 300 N Active	300	2100	1470
RC 320 N Active	320	2340	1638
RC 340 N Active	340	2580	1806

Explanation

STEP file is available for download

We will be happy to send you these models on request. Please use the link above or send us your request to info@hema-group.com

TANDEM The tandem versions are designed individually, please ask for them

Do you require a customization or a special solution? Please send your inquiry to info@hema-group.com.

Please note:
You can download the standard model of the RotoClamp N Standard and Active here (STEP).
The 3D CAD models provided here are intended solely for information and planning purposes. Despite careful creation, the models may contain errors, inaccuracies, or deviations from the actual products. The technical drawings, data sheets, and product specifications associated with the respective order confirmation are the sole authoritative references. Subject to change and errors; the respective written order confirmation applies.

RotoClamp Inside L Standard

RotoClamp Inside L	Required  shaft  diameter	Elastic  holding torque PN = 4 bar at 0 bar	Elastic  holding torque PN = 4 bar at 4 bar Booster	Modell	Download
Größe	mm	Nm	Nm	CAD	PDF
RC 70 L	70	124	210
RC 140 L	140	456	840
RC 180 L	180	750	1380
RC 200 L	200	930	1680
RC 240 L	240	1350	2400
RC 280 L	280	1800	3240
RC 320 L	320	2340	4200
RC 340 L	340	2580	4680

RotoClamp Inside L Active

RotoClamp Inside N Active	Required  shaft  diameter	Elastic  holding torque PN = 6 bar	Elastic  holding torque PN =4 bar	Modell	Download
Size	mm	Nm	Nm	CAD	PDF
RC 70 L Active	70	160	114
RC 140 L Active	140	630	456
RC 180 L Active	180	1050	750
RC 200 L Active	200	1300	930
RC 240 L Active	240	1850	135
RC 280 L Active	280	2500	1800
RC 320 L Active	320	3200	2340
RC 340 L Active	340	3550	2580

Explanation

STEP file is available for download

We will be happy to send you these models on request. Please use the link above or send us your request to info@hema-group.com

TANDEM The tandem versions are designed individually, please ask for them

Do you require a customization or a special solution? Please send your inquiry to info@hema-group.com.

Please note:
You can download the standard model of the RotoClamp L Standard and Active here (STEP).
The 3D CAD models provided here are intended solely for information and planning purposes. Despite careful creation, the models may contain errors, inaccuracies, or deviations from the actual products. The technical drawings, data sheets, and product specifications associated with the respective order confirmation are the sole authoritative references. Subject to change and errors; the respective written order confirmation applies.

RotoClamp Inside Y Standard

RotoClamp Inside Y	Required  shaft  diameter	Elastic holding torque PN = 6bar at 0 bar	Elastic- Haltemoment PN = 6 bar at 6 bar Booster	Elastic- Haltemoment PN = 4 bar at 4 bar Booster	Elastic- Haltemoment PN = 4 bar at 4 bar Booster	Modell	Download
Size	mm	Nm	Nm	Nm	Nm	CAD	PDF
RC 200 Y	200	600	1000	420	700
RC 260 Y	260	1600	2900	1120	2030
RC 325 Y	325	2300	4000	1610	2870
RC 395 Y	395	3300	6100	2310	4270
RC 460 Y	460	4600	8400	3220	5880

RotoClamp Inside Y Active

RotoClamp Inside Y Active	Required shaft diameter	Elastic holding torque PN = 6 bar	Elastic holding torque PN = 4 bar	Modell	Download
Size	mm	Nm	Nm	CAD	PDF
RC 200 Y Active	200	600	420
RC 260 Y Active	260	1600	1120
RC 325 Y Active	325	2300	1610
RC 395 Y Active	395	3300	2310
RC 460 Y Active	460	4600	3220

Explanation

STEP file is available for download

We will be happy to send you these models on request. Please use the link above or send us your request to info@hema-group.com

TANDEM The tandem versions are designed individually, please ask for them

Do you require a customization or a special solution? Please send your inquiry to info@hema-group.com.

Please note:
You can download the standard model of the RotoClamp Y Standard and Active here (STEP).
The 3D CAD models provided here are intended solely for information and planning purposes. Despite careful creation, the models may contain errors, inaccuracies, or deviations from the actual products. The technical drawings, data sheets, and product specifications associated with the respective order confirmation are the sole authoritative references. Subject to change and errors; the respective written order confirmation applies.

RotoClamp Inside Tandem

Our clamping systems are also available as a tandem version; the specified values increase by a factor of 1.8.

Please note:

These versions are already adjusted to the tandem function at the factory. A combination of clamping systems without prior processing is not possible.