RotoClamp Outside | HEMA Group

RotoClamp Outside is a compact clamping system for rotary applications. In the standard version, RotoClamp Outside is fail-safe, as the shaft is immediately fixed with great force in the event of a pneumatic failure. Alternatively, we also offer the active version with the opposite functional principle.

Below we have put together an overview of the RotoClamp Outside clamping elements in standard sizes for you.

Tandem version

For special requirements that require higher holding torques, the clamping systems can also be used in tandem versions. The holding torques increase by a factor of 1.8. Tandem versions must be ordered from the factory; the clamping systems are adapted for this.

Do you need a special version, individually tailored contours?
We would be happy to support you with your project - ask us.

RotoClamp Outside XS Standard

RotoClamp Outside XS	Required shaft diameter	Elastic holding torque PN = 6 bar at 0 bar	Elastic holding torque PN = 6 bar Booster at 6 bar	Elastic holding torque PN = 4 bar at 0 bar	Elastic holding torque PN = 4 bar Booster at 4 bar	Modell	Download
Size	mm	Nm	Nm	Nm	Nm	CAD	PDF
RCO 110 XS	110	125	230	90	150

RotoClamp Outside XS Active

RotoClamp Outside XS Actibe	Required shaft diameter	Elastic holding torque PN = 6 bar	Elastic holding torque PN = 4 bar	Modell	Download
Size	mm	Nm	Nm	CAD	PDF
RC0 110 XS Active	110	125	90

Explanation

STEP file is available for download

We will be happy to send you these models on request. Please use the link above or send us your request to info@hema-group.com

TANDEM The tandem versions are designed individually, please ask for them

Do you require a customization or a special solution? Please send your inquiry to info@hema-group.com.

Please note:
You can download the standard model of the RotoClamp Outside XS Standard and Active here (STEP).
The 3D CAD models provided here are intended solely for information and planning purposes. Despite careful creation, the models may contain errors, inaccuracies, or deviations from the actual products. The technical drawings, data sheets, and product specifications associated with the respective order confirmation are the sole authoritative references. Subject to change and errors; the respective written order confirmation applies.

RotoClamp Outside S

RotoClamp Outside S	Required shaft diameter	Elastic holding torque PN = 0 bar at 6 bar	Elastic holding torque PN = 6 bar bei Booster at 6 bar	Elastic holding torque PN = 0 bar at 4 bar	Elastic holding torque PN = 4 bar Booster at 4 bar	Modell	Download
Size	mm	Nm	Nm	Nm	Nm	CAD	PDF
RC0 150 S	150	250	460	170	320
RC0 170 S	170	359	650	250	454

RotoClamp Outside S Active

RotoClamp Outside S Active	Required shaft diameter	Elastic holding torque PN = 6 bar	Elastic holding torque PN = 4 bar	Modell	Download
Size	mm	Nm	Nm	CAD	PDF
RC0 150 S Active	150	250	170
RC0 170 S Active	170	360	250

Explanation

STEP file is available for download

We will be happy to send you these models on request. Please use the link above or send us your request to info@hema-group.com

TANDEM The tandem versions are designed individually, please ask for them

Do you require a customization or a special solution? Please send your inquiry to info@hema-group.com.

Please note:
You can download the standard model of the RotoClamp Outside S Standard and Active here (STEP).
The 3D CAD models provided here are intended solely for information and planning purposes. Despite careful creation, the models may contain errors, inaccuracies, or deviations from the actual products. The technical drawings, data sheets, and product specifications associated with the respective order confirmation are the sole authoritative references. Subject to change and errors; the respective written order confirmation applies.

RotoClamp Outside N

RotoClamp Outside N	Required shaft diameter	Elastic holding torque PN = 0 bar at 6 bar	Elastic holding torque PN = 6 bar Booster at 6 bar	Elastic holding torque PN = 0 bar at 4 bar	Elastic holding torque PN = 4 bar Boostert at 4 bar	Modell	Download
Size	mm	Nm	Nm	Nm	Nm	CAD	PDF
RC0 195 N	195	456	819	328	573
RCO 255 N	255	1080	1944	756	1361
RCO 315 N	315	1887	3468	1321	2428
RCO 385 N	385	3000	5500	2000	3800

RotoClamp Outside N Active

RotoClamp Outside N Active	Required shaft diameter	Elastic holding torque PN = 6 bar at 6 bar	Elastic holding torque PN = 4 bar at 4 bar	Modell	Download
Size	mm	Nm	Nm	CAD	PDF
RC0 195 N Active	195	460	330
RCO 255 N Active	255	1080	4060
RCO 315 N Active	315	1880	1330
RCO 385 N Acive	385	3100	2100

Explanation

STEP file is available for download

We will be happy to send you these models on request. Please use the link above or send us your request to info@hema-group.com

TANDEM The tandem versions are designed individually, please ask for them

Do you require a customization or a special solution? Please send your inquiry to info@hema-group.com.

Please note:
You can download the standard model of the RotoClamp Outside N Standard and Active here (STEP).
The 3D CAD models provided here are intended solely for information and planning purposes. Despite careful creation, the models may contain errors, inaccuracies, or deviations from the actual products. The technical drawings, data sheets, and product specifications associated with the respective order confirmation are the sole authoritative references. Subject to change and errors; the respective written order confirmation applies.

RotoClamp Outside XL

RotoClamp Outside XL	Required shaft diameter	Elastic holding torque PN = 0 bar at 4 bar	Elastic holding torque PN = 4 bar bei Booster at 4 bar	Modell	Download
SIze	mm	Nm	Nm	CAD	PDF
RC0 520 XL	520	3900	6500

RotoClamp Outside XL Active

RotoClamp Outside XL Active	Required shaft diameter	Elastic holding torque PN = 4 bar at 4 bar	Modell	Download
Size	mm	Nm	CAD	PDF
RC0 520 XL Active	520	3900

Explanation

STEP file is available for download

We will be happy to send you these models on request. Please use the link above or send us your request to info@hema-group.com

TANDEM The tandem versions are designed individually, please ask for them

Do you require a customization or a special solution? Please send your inquiry to info@hema-group.com.

Please note:
You can download the standard model of the RotoClamp Outside XL Standard and Active here (STEP).
The 3D CAD models provided here are intended solely for information and planning purposes. Despite careful creation, the models may contain errors, inaccuracies, or deviations from the actual products. The technical drawings, data sheets, and product specifications associated with the respective order confirmation are the sole authoritative references. Subject to change and errors; the respective written order confirmation applies.

RotoClamp tandem version - shown using the Inside version

Our clamping systems are also available as a tandem version; the specified values increase by a factor of 1.8.

Please note:

These versions are already adjusted to the tandem function at the factory. A combination of clamping systems without prior processing is not possible.

RotoClamp Outside XS

RotoClamp Outside XS Standard

RotoClamp Outside XS Active

RotoClamp Outside S

RotoClamp Outside S

RotoClamp Outside S Active

RotoClamp Outside N

RotoClamp Outside N

RotoClamp Outside N Active

RotoClamp Outside XL

RotoClamp Outside XL

RotoClamp Outside XL Active

RotoClamp Tandem-Ausführungen

RotoClamp tandem version - shown using the Inside version